Directory Navigation:
(1). 1050 aluminum coil and strip
Features: The aluminum content is 99.5%, with high plasticity, corrosion resistance, good conductivity, and thermal conductivity. However, it has low strength and cannot be strengthened through heat treatment. Its machinability is poor, but it is suitable for contact welding and gas welding. The production process is relatively simple, leading to a relatively cheap price.
| Thickness (mm) | 0.1-6 |
|---|---|
| Width (mm) | 100-2500 |
| Temper | H18 |
(2). 1060 aluminum coil and strip
Features: The 1060 aluminum coil contains a 99.6% aluminum content. It exhibits excellent elongation, tensile strength, and superior formability.
| Thickness (mm) | 0.1-6 |
| Width (mm) | 100-2500 |
| Temper | O,H18,H22,H24 |
(3). 1070 aluminum coil and strip
Features: The aluminum coil known as 1070 has an aluminum content of 99.7%. It possesses notable qualities such as excellent plasticity, resistance to corrosion, efficient conductivity, and thermal conductivity. Due to these advantageous features, the 1070 aluminum coil finds extensive application in the production of specialized structural components like electric wires, cable protection nets, wire cores, aircraft ventilation system parts, and decorative items.
| Thickness (mm) | 0.1-6 |
|---|---|
| Width (mm) | 100-2500 |
| Temper | O,H18,H22,H24 |
(4). 1100 aluminum coil and strip:
Features: The 1100 aluminum coil has an aluminum content of 99%. Due to its low density and excellent plasticity, it is commonly utilized for components that necessitate exceptional formability, superior resistance to corrosion and do not demand high levels of strength. This includes sheet metal products, hollow hardware, radiators, welding combination keys, reflectors, nameplates, and other similar items.
| Thickness (mm) | 0.15-4.5 |
|---|---|
| Width (mm) | 400-2650 |
| Temper | O,H14,H18,H22,H24 |
(1). 3003 aluminum coil and strip
Features: The 3003 aluminum coil is an exemplary Al-Mn alloy that exhibits excellent formability, corrosion resistance, weldability, deep drawing capabilities, and high plasticity.
| Thickness (mm) | 0.15-8 |
|---|---|
| Width (mm) | 100-2500 |
| Temper | O,H18,H22,H24 |
(2). 3004 aluminum coil and strip
Features: The 3004 aluminum coil is classified as an AL-Mn alloy and possesses a higher strength compared to the 3003 aluminum coil. It exhibits excellent formability, solubility, and resistance to corrosion, making it suitable for manufacturing parts that require greater strength than those made from the 3003 alloy.
| Thickness (mm) | 0.15-8 |
|---|---|
| Width (mm) | 100-2650 |
| Temper | O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114, H11 |
(3). 3004 aluminum coil stock
| Thickness (mm) | 0.4,1,0 |
|---|---|
| Width (mm) | 955,500 |
| Temper | H16,H24 |
| Weigth(ton) | 1-10 |
(4). 3104 aluminum coil and strip
Features: The 3104 aluminum coil demonstrates excellent performance in deep drawing, with high strength, corrosion resistance, formability, and weldability. As a result, it is widely utilized as a material for tank bodies.
| Thickness (mm) | 0.2-10 |
|---|---|
| Width (mm) | 100-2650 |
| Temper | O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114, H116 |
(5). 3105 aluminum coil and strip
Features: The 3105 aluminum coil exhibits excellent resistance to rust and is highly conductive, with a conductivity level of up to 41%. It demonstrates high pliability when in an annealed state, good pliability during semi-cold work hardening, but lower pliability during cold work hardening. Additionally, it showcases good resistance against corrosion, weldability, and poor machinability.
| Thickness (mm) | 0.1-6 |
|---|---|
| Width (mm) | 100-2650 |
| Temper | O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114, H116 |
(6). 3105 aluminum coil stock
| Thickness (mm) | 0.81，1.27，1.6 |
|---|---|
| Width (mm) | 1219 |
| Temper | H14 |
| Weight (ton) | 3-20 |
(1). 4004 aluminum strip
Features: 4004 is an aluminum alloy with hypoeutectic properties. It exhibits qualities such as a low melting point, excellent fluidity, and ease of feeding. Typically employed as a replacement for composite plates, it also finds extensive application as aluminum brazing materials.
| Thickness (mm) | 0.05-4 |
|---|---|
| Width (mm) | 100-1000 |
| Temper | O, H12, H14, H16, H18 |
(2). 4017 aluminum strip
Features: The 4017 aluminum strip undergoes annealing through a continuous heat treatment line to achieve precise dimensions and excellent flatness.
| Thickness (mm) | 0.1-6 |
|---|---|
| Width (mm) | 100-2650 |
| Temper | O,H18,H22,H24 |
(3). 4045/4047 aluminum strip
Features: The 4045 aluminum coil is well-suited for the brazing of aluminum alloys such as 3004, 5005, 6063, and 6951. It has the capability to produce exceptional welding joints.
| Thickness (mm) | 0.1-6 |
|---|---|
| Width (mm) | 100-2650 |
| Temper | O,H18,H22,H24 |
(1). 5052 aluminum coil and strip
Features: The material has excellent resistance to corrosion, is easy to weld, can be easily worked at low temperatures, has high resistance to fatigue, possesses high plasticity and corrosion resistance, is difficult to machine, and can be polished.
| Thickness (mm) | 0.15-0.5 |
|---|---|
| Width (mm) | 100-200 |
| Temper | O, H24, H32, H34, H112 |
(2). 5083 aluminum coil and strip
Features: It has good resistance to corrosion and performs excellently in welding. It is frequently utilized in oceanographic engineering applications, such as shipbuilding.
| Thickness (mm) | 0.15-0.5 |
|---|---|
| Width (mm) | 100-2500 |
| Temper | H18, H32, H34, H22, H24, H38, O |
(3). 5182 aluminum coil and strip
Features: The 5182 aluminum alloy is known for its impressive resistance to corrosion, excellent ability to be welded, good workability in cold conditions, and moderate strength. These qualities make this series of aluminum coil and strip highly sought-after in the automotive industry for their ability to contribute to lightweight vehicles.
| Thickness (mm) | 0.15-0.5 |
|---|---|
| Width (mm) | 100-2500 |
| Temper | H18, H32, H34, H22, H24, H38, O |
(4). 5754 aluminum coil and strip
Features: The 5754 aluminum coil products exhibit outstanding corrosion resistance, exceptional processing capabilities, and weldability. Additionally, they are easily moldable and shapeable. The use of 5754 aluminum alloy plates in various heat treatment conditions is mainly in automobile manufacturing for components such as car doors, molds, and seals. These plates are also extensively utilized in the can-making industry.
| Thickness (mm) | 0.15-6 |
|---|---|
| Width (mm) | 100-2500 |
| Temper | H18, H32, H34, H22, H24, H38, O |
(1). 6061 aluminum coil and strip
Features: The material has numerous advantages, including minimal deformation post-machining, excellent quenching capabilities, high stability, and more. It finds extensive application in various fields such as mobile phone shell materials, car hubs, trolley boxes, and 3C products.
| Thickness (mm) | 0.15-8 |
|---|---|
| Width (mm) | 100-2600 |
| Temper | O, T4, T6, T651, F |
(2). 6082 aluminum coil and strip
Features: 6082 is an alloy that undergoes heat strengthening and exhibits excellent characteristics such as formability, weldability, machinability, and corrosion resistance. It also possesses moderate strength and retains its operational efficiency even after annealing. These alloys are primarily utilized for applications like trolley bus skin, all-aluminum bus roofs, aluminum roof skin, or as a covering material for aluminum buses.
| Thickness (mm) | 0.8-3.0 |
|---|---|
| Width (mm) | 100-2600 |
| Temper | T6, T651 |
(1). 8011 aluminum coil and strip
Features: The applications of this series of alloys are diverse, including but not limited to building exterior walls, beverage bottle caps, pharmaceutical packaging, food packaging, cable foil, milk cap materials, and sealing foil.
| Thickness (mm) | 0.006-6.0 |
|---|---|
| Width (mm) | 900-1400 |
| Temper | O, H14, H16, H18, H19, H22, H24 |
(2). 8079 aluminum coil and strip
Features: The 8079 aluminum coil exhibits excellent elongation and spreading pressure, effective oil removal, minimal pinholes, favorable product shape, and maintains its form when cut. This type of aluminum coil is commonly employed in the production of lunch box materials, medicine capsules, food packaging, battery soft bags, and more.
| Thickness (mm) | 2-8 |
|---|---|
| Width (mm) | 1100-1800 |
| Temper | T6, T651 |
The aluminum insulation coil, also known as the pipe-cladding aluminum coil, is commonly utilized for safeguarding pipes and equipment against potential harm.
Aluminum insulation coils are commonly made from various alloy types, including 1060, 1100, 1200, 3003, 3004, 3105, 5052, and 8011.
There are several commonly used types of aluminum insulation coils.
Linsy Aluminum offers Polysurlyn moisture retarder aluminum coil jacketing that consists of three films: a 1 mil high-density polyethylene film, a 1 mil surly film, and a 1 mil low-density polyethylene film. This product is cost-effective and provides effective corrosion protection for pipelines. It is specifically designed for pipeline applications that are exposed to water over an extended period of time.
The color-coated insulation coil made of aluminum meets the requirements stated in ASTM B209 and ASTM C-1729. If desired, customized colors can be arranged.
The embossed aluminum insulation coil is typically the traditional orange peel embossed aluminum insulation coil. It can also be tailored to meet the specific requirements of customers.
Apart from the aforementioned products, Linsy Aluminum also offers kraft paper-coated aluminum coil jacketing, corrugated aluminum coil jacketing, and mill-finish aluminum coil. All of these products adhere to the ASTM B209 and ASTM C-1729 standards.
Common specifications:
| Temper | H14 H16 H24 H26 |
| Thickness | 0.40mm-1.5mm |
| Standard width | 914mm 1000mm 1200mm 1219mm |
| Inner diameter | 305mm 405mm 505mm with or without paper core |
| Outer diameter | according to the coil weight and surface treatment, the most common coil length is 125m 150m 250m 300m 500m 1000m 2540m. |
Pop cans can be made from two types of materials, namely aluminum and tinplate. The use of aluminum cans is steadily rising due to its high recycling value, which contributes to environmental protection. Aluminum cans are favored by many because they are lightweight, compact, durable, and convenient to transport.
They can cover's aluminum strip is created by punching it all at once, followed by reshaping the strip through plastic deformation. This process enhances its ability to withstand deformation, resulting in lightweight, strong, and rigid stamping parts.
Typically, a soda can is created by sealing the can's body with its cover. The body of a soda can is typically composed of aluminum alloy plates that have undergone multiple rounds of thinning and stretching. It should be noted that the aluminum materials used for the can cover, pull ring, and can body are not the same.
| Alloy | Temper | Hot rolled coil specification (mm) | ||||
| Thickness | Width | Coil inner diameter/minimum length | Coil outer diameter/maximum length | application | ||
| 3004 | F, O, H111, H112 | 1.8-8 | 1000-2400 | Inner diameter：605 Minimum length： 1, 000 |
Maximum outside diameter: 2, 800 Maximum length: 10, 000 |
Can body material, etc. |
| 3104 | F, O, H111, H112 | 2.0-8 | Can body material, etc. | |||
| 5052 | F, O, H111, H112 | 2.2-8 | Can cover material, etc. | |||
| 5182 | F, O, H111, H112 | 2.5-8 | Can cover, pull ring, etc | |||
Surface requirement:
Flatness: The wave height must not exceed 3 mm within 1 m, and there should be no obvious waves exceeding 3/m.
Side bending: The product should not bend more than 0.5mm on any length of 2000mm.
End warpage: The products must be cut to a length of 1500mm or less, with a maximum end warpage height of 5mm. No joints are permitted.
Surface: The appearance quality of the product should not be affected by any serious bubbles, missed coatings, scratches, corrosion, oil stains, peeling, stripes, color differences, speckles, roll printing, periodicity, etc. Additionally, the burr should be equal to or less than 0.04mm.
End face: The end face should be neat, tightly rolled, with no loose layers. The layers should be staggered by ≤ 2mm and the tower shape should be ≤ 5mm.
Heat exchanger fins are predominantly crafted from aluminum or copper strips. The utilization of aluminum strips in heat exchanger fins is steadily increasing due to its cost benefits, as opposed to copper strips. The majority of heat exchanger fins are constructed using 4-series alloy aluminum strips. Additionally, multi-layer composite brazing coils are frequently employed in the production of fins.
Commonly utilized aluminum strips for radiator fins
4004 aluminum alloy, which is also referred to as 4004 brazing material, is made up of magnesium. Its composition is specifically engineered for vacuum brazing purposes. This alloy showcases numerous beneficial characteristics such as its lightweight nature, minimal coefficient of thermal expansion, remarkable volume stability, relatively low melting point, outstanding wear resistance, and exceptional performance at high temperatures.
Common brazing aluminum coils and strip
4004/4104 aluminum coil and strip are essential raw materials for producing aluminum heat exchangers using the vacuum brazing process.
4043 aluminum strip offers several advantages including a low melting point, excellent fluidity, and resistance to corrosion. These properties make it highly effective in preventing welding cracks. On the other hand, the silicon content of 4343 aluminum alloy is higher than that of 4043 aluminum alloy. As a result, 4343 aluminum alloy exhibits a low melting point, a narrow solidification range, and good fluidity.
4047 aluminum strip is made from an Al, Mg, Si alloy that exhibits remarkable plasticity. This alloy offers various advantages, such as exceptional processing performance, excellent weldability, extrudability, and electroplating capabilities. It also boasts good corrosion resistance, toughness, and easy polishing properties. Furthermore, 4047 aluminum is a one-of-a-kind alloy that can serve as a cladding material or filler in aerospace and automotive applications.
Cladding brazing coil and strip
There are two categories of cladding layers.
Standard material for the brazing layer: Aluminum Silicon (4000)
Common sacrificial anode materials for anticorrosive coating: AL Zn Cr (7072) and more.
Typical core materials: Al-Mn(3000) and Al-Si-Mg(6000).
The cladding layer of the composite brazing coil and strip can be made multi-layer based on customer specifications. Linsy has the capability to produce composite brazing aluminum coil and strip with up to 7 layers.
Common composite brazing coil and strip
| Alloy | Thickness(mm) | Tolerance(mm) | Clad Ratio(%) | Tensile Strength(MPa) | Yield Strength(MPa) | Elongation(%) Min | Application |
| 4343/3003 | 1.2~3.0 | ±0.03 | 5~10 | 100~150 | ≥45 | 25 | Engine radiator |
| 4343/3003/7072 | 1.2~3.0 | ±0.03 | 5~10 | 100~150 | ≥45 | 25 | |
| 4343/3003/4343 | 0.1~0.12 | ±0.005 | 8~12 | 150~120 | ≥120 | 1 | Air conditioner condenser, intercooler |
| 4045/3003/4045 | 0.1~0.12 | ±0.005 | 8~12 | 150~200 | ≥120 | 1 | intercooler |
| 4104/3003/4104 | 0.1~0.12 | ±0.005 | 8~12 | 150~200 | ≥120 | 1 | Battery cooler |
| 4104/6063/4104 | 0.1~0.12 | ±0.005 | 8~12 | 150~200 | ≥120 | 1 |
The manufacturing process of the aluminum strip used in transformers involves casting and rolling, cold rolling, shearing, and annealing. Its production characteristic is high precision when compared to regular aluminum strips. This means that it places significant importance on the surface quality, burr curling, conductivity, and other technical indicators of the aluminum strip.
Common aluminum strip alloys for transformers:
| Alloy | Temper | Transformer strip specification (mm) | ||||
| Thickness (mm) | Width (mm) | Aluminum content (%) | Conductivity (%) | characteristic | ||
| 1050 | O | 0.2-3.0 | 20-1650 |
99.5 | 60 | Dry-type transformers, large transformer, solar energy, power industry, etc.No burr at the edge |
| 1060 | O | 2.0-8 | 99.6 | 61 | ||
| 1070 | O | 2.2-8 | 99.7 | 62.5 | ||
| 1350 | O | 2.5-8 | 99.35 | 60 | ||
Feature:
What is the aluminum trim coil and strip?
Aluminum trim coil and strips are extensively utilized in the construction industry due to their exceptional insulation and weather resistance properties. This versatile material is particularly suitable for roof and cladding decoration, offering added sun protection functionality.
Specifications
| Category | PVC/PVDF color coated aluminum coil | PE color coated aluminum coil |
| Alloy | 1100; 3003; 3105;5005 | 1100; 3003; 3105;5005 |
| thickness | 0.25mm, 0.30mm, 0.40mm, 0.50mm | 0.25mm, 0.30mm, 0.40mm, 0.50mm |
| width | 1240mm, 1270mm, 1520mm, 1550mm, 1575mm | 1240mm, 1270mm, 1520mm, 1550mm, 1575mm |
| coating thickness | Over 25 micros | Over 16 micros |
| Roll diameter | 405mm, 505mm | 405mm, 505mm |
| Coil weight | 2.5 to 3.0 tons coil | 2.5 to 3.0 tons per coil |
| color | Almond, Beige, Cactus, Champagne, Cobblestone, Cream, Evergreen, Fern, Firebrick, Granite, Graphite, Ivy, Khaki, Linen, Maverick Brown, Mocha, Musket Brown.Olive, Royal Brown, Russet, Sand, Sandstone, Seaport, Sierra, Silver, Smoke, Steel Blue, Tan, Tumbleweed, Wedgewood, Wheat, White, Yellow | |
| Aluminum trim coil and strips of different sizes can be customized according to customer requirements | ||
Features: The material possesses moderate strength, can withstand various weather conditions, and is resistant to corrosion. It is also easy to bend and weld has a long service life, is lightweight, provides thermal insulation and waterproofing, and offers excellent surface effects.
Field of application
The production of aluminum gutters and downspouts involves the use of 3105 and 3025 aluminum alloy coil and strip. A roller is utilized to coat both sides of the gutters and downspouts with polyester (PET) paint. The front facial film has a thickness that ranges from 25 to 28 um, while the back facial film has a thickness ranging from 15 to 18 um. The color is long-lasting and resistant to wear, guaranteeing durability.
Alloy: 3105, 3025
Temper: H24, H44
Surface treatment: PET, PE, and PVDF coatings.
Typical thickness: 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, and so on.
Typical width: the measurements include 266mm, 285mm, 300mm, 405mm, 448mm, and so on. They can be cut to meet the specific needs of customers.
Color: white is the most frequently chosen color among customers, with a wide variety of almost 1000 other colors available for selection.
Aluminum roofing coil offers numerous advantages: durability, corrosion resistance, lightweight, high strength, good plasticity, and easy installation. It is widely used in civil construction for roofs of aircraft terminals, railway stations, exhibition halls, and even in ordinary homes.
Common aluminum alloy for Aluminum roofing coil
| Alloy | Temper | Specifications | coating | Surface treatment | |
| Thickness | Width | ||||
| 3003 | h24 | 0.5mm/ 0.8mm/ 1.0mm | 1000mm/ 600mm/ 575mm | PVDF FIVE PE | Grey/Silver Grey/Flash Silver; The back coating is generally white |
| 3004 | h24，h26 | ||||
| 3105 | H44 | ||||
| The product can be coated on both sides | |||||
The aluminum alloy exhibits excellent thermal conductivity, making it a popular choice as the shell material for LED lamps in the industry. In addition to using materials with high thermal conductivity for the shell, the quality of LED lamps is also affected by the design of an appropriate heat dissipation area and minimizing the thermal resistance between the LED chip and the surface of the shell that comes into contact with air.
Features: The LED lamp's aluminum alloy shell provides excellent heat dissipation and waterproof performance. It has a sleek design, an embedded structure with an adjustable light angle, and is suitable for various applications.
Linsy Aluminum is a contemporary aluminum processing company on a large scale, encompassing scientific research, manufacturing, and processing. The company has the capability to manufacture aluminum coil and strip products in the 1-8 series, with a wide range of specifications, substantial capacity, and competitive pricing. Rest assured that all your personalized processing needs can be met by our offerings.
The product has been certified with CE ISO9001. It has the flexibility to be tailored to customer specifications and is compliant with various standards including Japanese, European, and American standards.
Uncover More Linsy Aluminum Sheet
LINSY ALUMINUM boasts a comprehensive lineup of materials, covering the entire spectrum from the 1000 to 8000 series. Notably, our aluminum sheets stand out as exceptionally popular and in high demand. Learn more about our products and continue your exploration.
